Han's Laser Smart Equipment Group presented laser cutting, tube processing, bending and welding equipment at two major industry exhibitions in Europe and North America, highlighting sheet metal fabrication equipment and metal processing solutions tailored to regional production needs.
HANNOVER, Germany, and LAS VEGAS, U.S. — October 2026 — Han's Laser Smart Equipment Group exhibited at EuroBLECH 2026 in Hannover and FABTECH 2026 in Las Vegas, presenting a broad portfolio of equipment for sheet metal processing and metal fabrication.
Held from October 20–23, EuroBLECH brought the company’s high-precision sheet and tube processing solutions to European manufacturers. At FABTECH, held October 21–23 at the Las Vegas Convention Center, Han's Laser showed equipment spanning laser cutting, tube cutting, press brakes and laser welding for North American production environments.
The two exhibitions gave manufacturers an opportunity to discuss equipment performance, application requirements, local support and project delivery with the Han's Laser team. The company reported multiple cooperation opportunities and said follow-up discussions are underway.
EuroBLECH 2026: Precision-focused solutions for European manufacturing
At EuroBLECH, Han's Laser presented equipment designed to address demanding requirements for precision, stable operation and process flexibility in European sheet metal production.
G3015F Master laser cutting machine
The G3015F Master features a heavy-duty welded bed structure and precision guide rails and racks, designed to support rigidity and long-term accuracy. Its integrated design is configured for transport in a 40-foot high-cube container. A dual-motor-driven exchange table supports efficient table changes and heavy workpieces.
The machine is designed to handle both high-power thick-plate cutting and high-speed thin-sheet processing, making it suitable for a range of production scenarios in medium and large sheet metal facilities.
G3015HF S (Smart) exchange-table laser cutting machine
The G3015HF S (Smart) combines high dynamic performance with an enclosed design. Safety features include interlocked access and OD5+ laser-protection glass.
With a mixed-gas processing option and a laser source of 20 kW or higher, the system is designed for fast cutting of carbon steel in the 10–40 mm thickness range. The configuration targets manufacturers seeking to control cut-edge quality and corner dross in medium- and thick-plate applications.
MPS-T5 laser tube cutting machine
The MPS-T5 processes round, square, rectangular and special-shaped tubes. Its modular design supports flexible loading and unloading configurations, including semi-automatic or automatic loading and options such as diameter-adjustable roller-assisted or floating unloading.
The system is intended for manufacturers processing a mix of tube profiles and looking to balance cutting quality, production flexibility and operational efficiency.
FABTECH 2026: Equipment for North American fabrication workflows
At FABTECH, Han's Laser displayed equipment covering multiple stages of metal fabrication—from sheet and tube cutting to bending and welding. The portfolio was presented for applications in sectors such as automotive, construction equipment, heavy machinery and general sheet metal fabrication.
G3015HF EXPERT laser cutting machine
The G3015HF EXPERT was featured for North American sheet metal applications. Its high dynamic performance and cutting speed are designed to support continuous production requirements.
TX9036T heavy-duty laser tube cutting machine
The TX9036T is designed for large, heavy and long tube profiles. Its load capacity and extended processing length target thick-wall tube applications in structural steel, heavy machinery and oil and gas equipment manufacturing.
The machine is intended to support stable batch processing and greater automation for demanding heavy-tube production.
HBD2331 hybrid servo press brake
The HBD2331 uses independently controlled left and right servo drives to adjust power and motion according to the bending process. Han's Laser states that processing efficiency can increase by up to 50% compared with conventional equipment, depending on the application and operating conditions.
The press brake combines bending force for heavier workpieces with responsive operation, lower energy consumption and reduced operating noise. It is designed for medium- and thick-plate applications, including engineering and heavy machinery.
HBE0620 all-electric press brake
The HBE0620 uses all-electric servo drive technology and is designed for precision batch bending of thin sheet. Without hydraulic oil, it eliminates the risk of hydraulic oil leakage and can simplify maintenance.
Its applications include electrical cabinets and precision sheet metal enclosures, where repeatable positioning, fast bending cycles and low-maintenance operation are important.
Robotic handheld laser welding system
Han's Laser also presented a laser welding solution combining a collaborative robot with handheld welding. The system is designed for flexible welding of irregularly shaped parts and small-batch, non-standard workpieces.
Potential applications include sheet metal enclosures, frames and construction machinery components. Laser welding can help reduce heat distortion and post-weld grinding in suitable applications, while supporting manufacturers facing challenges in recruiting experienced welders.
A multi-process portfolio for global manufacturers
Across both exhibitions, Han's Laser highlighted equipment for laser cutting, tube cutting, bending and welding. The product range is intended to give manufacturers options for connecting multiple fabrication processes and selecting equipment according to material, part geometry, throughput and production layout.
At EuroBLECH, the emphasis was on precision-oriented solutions for European sheet metal processing. At FABTECH, the company presented a broader fabrication portfolio for North American production needs, including heavy-tube processing, press brakes and flexible welding.
Continuing investment in international markets
Han's Laser Smart Equipment Group said it will continue developing laser processing and metal forming equipment while strengthening its overseas service capabilities. The company aims to support customers with application-focused equipment, technical assistance and local service resources.
FAQ
1. When and where were EuroBLECH 2026 and FABTECH 2026 held?
EuroBLECH 2026 was held October 20–23, 2026, in Hannover, Germany. FABTECH 2026 was held October 21–23, 2026, at the Las Vegas Convention Center in Las Vegas, U.S.
2. What laser equipment did Han’s Laser showcase at these exhibitions?
Han’s Laser presented laser cutting machines (G3015F Master, G3015HF S and G3015HF EXPERT), laser tube cutting machines (MPS-T5 and TX9036T), press brakes (HBD2331 hybrid servo and HBE0620 all-electric) and a robotic handheld laser welding system.
3. What industries are these metal fabrication solutions designed for?
The equipment targets applications in automotive, construction equipment, heavy machinery, general sheet metal fabrication and oil and gas equipment manufacturing, with configurations tailored to different materials, workpieces and production requirements.
About Han's Laser Smart Equipment Group
Han's Laser Smart Equipment Group provides equipment and solutions for laser processing and metal forming, including laser cutting, tube processing, press brakes and welding systems. Its products serve a range of manufacturing applications, with configurations tailored to different materials, workpieces and production requirements.
LET’S TALK
